How To Reprogram Schlage Code. Under things, choose add a thing and follow the directions in the app. Unlike most of commercial locks, the fe 595 / fe 575 have unique default programming codes for each lock.
Please keep this guide you will need these codes to operate your lock! User codes cannot be recovered after this function is completed. Press and hold the schlage button again until you hear a beep.
The Following Steps Must Occur Within 10 Seconds:
Clear the door lock codes. 2 delete all user codes function will remove all user codes, but will not change the programming code. Press the “schlage” button and the number “1” button simultaneously to add/change a new entry code.
3 The Turn Lock Feature Is Available Only On The Be369 (Deadbolt).
Wait for the “schlage” button to beep and flash three times. Press the “schlage” button and the number “1” button simultaneously to add/change a new entry code. Press and hold the schlage button again until you hear a beep.
The Schlage Button Will Light Green For One Second.
User codes cannot be recovered after this function is completed. How do you reprogram a schlage lock? Then, press and hold the schlage button until it lights green and the lock beeps.
Enter A New Programming Code (6 Digits) And Wait For The Schlage Button To Illuminate Orange Three Times, Followed By Three Beeps.
If you encounter a residential door preparation or fit issue under the guaranteed fit program or have a claim under Under things, choose add a thing and follow the directions in the app. Clear the current door lock codes by pressing and holding the schlage button on the front of the lock until it turns green.
The Programming Code And (2) User Codes Are Lock Specific, And Once The User Has Acquired This Information The Lock Can Be Programmed With A New Code Per The Instructions, Downloadable From The Link Below.
Press and release the schlage button on the front of the lock. Enter a new (4 digit) user code and wait for the light indicator to illuminate orange three times and beep three times. You must remove the keypad from the door to see the.