close
close
Menu Close

How To Read A Dial Indicator Mm

th 199

How To Read A Dial Indicator Mm. The divisions passed on the dial scale × smallest division value of the dial scale = dial scale reading. Next, close the huge flat dial indicator jaws by bringing them together completely.

Mitutoyo 2902S DIAL INDICATOR METRIC 2902S Cromwell Tools
Mitutoyo 2902S DIAL INDICATOR METRIC 2902S Cromwell Tools from www.cromwell.co.uk

To get your total reading, add the two values together. Roughly, observe the outer and the inner dial scale, then add those two readings. ・use of product other than as described in the manual may cause accident.

It Is Indicated On The Face Of The Dial By A Dial Finger.

To get your total reading, add the two values together. 0 × 0.02 mm = 0 mm. When shaft angularity readings are obtained in this manner, the amount of angularity equals the total indicator reading (tir) divided by the indicator circle diameter.

List Of Printable Exercises To Support The Teacher’s Performance In Lectures, At A Distance And For Student Practice.

• dial face reads in inch (black) or metric (red). Learning how to read the dial indicator is easy. With a reading in millimeter centesimal (0.01 mm) and nominal strip of 10 mm.

0 × 0.02 Mm = 0 Mm.

The dial indicator uses a calibrated stem that transfers linear movement to an easy to read dial face. Main scale reading + dial scale reading − zero error reading = final reading The dial indicator or the plunger dial gauge is one of the simplest and the most widely used mechanical comparator.

In My Opinion, In Good Working Order And I S Ready For Your Use.

Roughly, observe the outer and the inner dial scale, then add those two readings. This video will show the mechanic how to read and use a standard dial indicator in the shop to measure parts. When taking measurements, you should first read the value on the main scale.

Reading Exercises And Interpretation Of Dial Indicator In Millimeter And Inch.

In this case, there are 4…or 0.400”. ・use for any purpose other than measuring may damage or wear the instrument. Next, read the value that the needle on the dial is pointing at and write that down as well.

Leave a Reply

Your email address will not be published.