# How To Open A Diebold Safe With 3 Number Combination

How To Open A Diebold Safe With 3 Number Combination. You must dial the combination precisely without backing up. Therefore just dialing the 3 or 4 numbers of the combination and stopping at the last number and trying the handle to open the safe is the method to try.

With the door open, perform the following procedure to change the combination from four numbers to a new four number combination. Therefore just dialing the 3 or 4 numbers of the combination and stopping at the last number and trying the handle to open the safe is the method to try. Its locked and there's no combination so i'm probably giong to have to drill the door to get into the combination lock.

### These Instructions Pertain To Dial Safes That Have A 4 Digit Combination.

How to open a diebold safe with 3 number combination. 2) turn the dial to the left passing the second number twice, stopping on the third time. Mechanical group ii combination locks:

### Combination Lock Step 3 Turn The Dial Clockwise , And Stop Turning It When The Combination Number '10' Aligns With The Open Index The 3Rd Time.

1) spin the dial left (ccw) at least four times and stop on the first number of the combination. Before beginning the dialing sequence for a combination, clear the lock. After you change the combination, and before you close the door, try the new combination a minimum of three times.

### You Must Dial The Combination Precisely Without Backing Up.

Combinations of this type might start by turning either to the left or right to the first number at least the same number of times as there are numbers to the combination. Handle center to dial center is 3. Align the numbers with the opening index and dial the new combination as explained in section 1.

### Combo Is Dialed Properly, But, You Do Not Make The 'Turn To Stop., But Instead Then Turn The Handle, And The Safe Door Opens.

Once you dial the 3 numbers correctly. To unlock the safe turn the dial in the direction of the arrow for each number, stopping at the opening index mark (crow's foot) located at the top (12 o'clock position) of the dial ring. Therefore just dialing the 3 or 4 numbers of the combination and stopping at the last number and trying the handle to open the safe is the method to try.

### To Clear The Lock, Turn The Dial A Minimum Of Five Complete Rotations;

Combination lock step 3 turn the dial clockwise , and stop turning it when the combination number '10' aligns with the open index the 3rd time. I'm getting a diebold file safe that is about 5 feet tall and 3 feet wide, double doors. The new style locks, the bolt on the combo lock blocks.