close
close
Menu Close

How To Install Bosch Dishwasher Kick Plate

th 80

How To Install Bosch Dishwasher Kick Plate. Press the flap back so that the flap's corner cutouts fit securely into place. Screwed the kick plate back on and haven't had a problem.

Dishwasher Toe Panel (part 154745503) How To Replace
Dishwasher Toe Panel (part 154745503) How To Replace from www.youtube.com

I took off the kick plate and put the black rubber flap up flush with the bottom surface and behind where the kick plate goes. This procedure helps prevent warping of the plate so that it will install flat against the door. I removed the kick plate and opened the door.

Can't Find A Part Or Not Sure This Is The Right Part Please Feel Free To Call Us On 03 8373 6044 Fill Out This Enquiry Form.

Dishwasher grille & kickplate parts shop online or call 8002692609. Position the slotted toe panel (f) on the dishwasher. To connect to a garbage disposal, disconnect the power and remove the plug on the garbage disposal.

In Literally Five Minutes, This Custom Made Kick Plate Was In Place Without Drilling Holes, Without Using A Saw, Or Any Other Tool.

Let the slotted toe kick sit on the floor and rest against the front of the dishwasher. Be careful however because the bottom of the door panel descends below the full height of your toe kick as described in several other threads here. Turn off the electric power to your dishwasher at the breaker box or unplug it from the outlet beneath the sink.

Pull The Kick Plate Down Slightly And Away From The Dishwasher.

The piece of balsa wood i bought cost about $3, while the plastic kick plate from the manufacturer was about $60 with taxes and shipping. Let the slotted toe kick sit on the floor and rest against the front of the dishwasher. Press the flap back so that the flap's corner cutouts fit securely into place.

On Several Dishwashers, The Bottom Plate, Or Kick Plate, Is The Location Of The Motor And Water Pipes.

Remove the screw on each end of the kick plate with a nut driver. Position the angled edge of the remaining toe kick against the top of the access opening along the bottom front of the dishwasher. Pull the insulation strip from under the plastic access base with your fingers if your bosch unit has an access base in addition to the kick plate.

If You're Replacing An Existing Dishwasher, The Drain Will Already Have This Fitting.

What is a dishwasher kick plate? Open 7 days a week. Allow it to rest on the floor.

Leave a Reply

Your email address will not be published.