How To Install Bosch Dishwasher Drain Hose. It is sold as an individual unit. Extends the dishwasher drain hose by up to 6.4 ft.
Next, connect one end of the drain hose connector to the garbage disposal’s connection port or the air gap. Wait at least one minute for 'clean' to light up on the dishwasher's display. Pull the hose out and install the new hose.
Connect The End Of This Hose To The Air Gap, Using A Hose Clamp.
Dishwasher drain hoses can be connected to the garbage disposal in different ways. Shut off the power and water supply; Install the new drain hose by reversing the steps above.
Here Are The Steps Involved With Installing Your Bosch Dishwasher Drain Hose.
We would like to invite you to take part in a short one minute survey. The electric plug, water supply and drainage hoses should be placed on either the left or right side of the dishwasher. My bosch dishwasher still has water in it!” this is a little unsettling, but check the drain line that connects the dishwasher to the sink or garbage disposal.
Ensure The Plug And Hoses Can Extend At Least 60Cm So That The Dishwasher Can Be Pulled Out From The Cabinet For Maintenance.
Can a dishwasher drain hose be too long? Fit it snugly over the port. Then pry down clamp to loosen it and then wrap it around the port end.
Using A Screwdriver And The Pliers, Disconnect The Drain Hose That Is Attached To The Air Gap (Or Garbage Disposal), Drain The Water, And Check If The Hose Is Blocked.
This drain hose is made of durable plastic. • you can attach it to your undersink dishwasher drain connection. Connect the water supply to the inlet valve;
At Bosch, We Continuously Aim To Improve Our Website And The Information We Provide.
Route the new drain hose through the water inlet bracket the same way the original drain hose was routed. First, you will pull the drain hose as much as you can. Attach the new dishwasher drain hose to the drain pump, carefully working the hose onto the drain pump outlet and onto the connection so it seats properly and does not leak.