close
close
Menu Close

Diy Wooden Storage Box With Lid

th 140

Diy Wooden Storage Box With Lid. The unique lid on this box looks like an optical illusion at first glance. Glue and nail the boards to the inside of the box and do the same with the slightly thicker large board that will make up the floor of your outdoor storage box.

Large Rectangular Wooden Storage Box With Lid And Handles
Large Rectangular Wooden Storage Box With Lid And Handles from www.ebay.co.uk

And the result looks really nice. Once the box was mostly assembled and the top was built and set aside, i sanded down everything using first a 36 grit, then an 80 and finally a 150 grit sandpaper. Plus, this is a great way how to recycle wood materials, when you have a single plank lying around.

The Unique Lid On This Box Looks Like An Optical Illusion At First Glance.

If you are making several boxes at once, label each box and corresponding lid either alphabetically or numerically, so that they will match up with each other later. Screw them on the lid from inside. Crafted from bubinga and wenge and accented with a bronze tree design inlay.

Place The Hardware In The Places You Want Them And Screw Into Place.

Legs were built by both extending the box’s corner boards downward and also placing 2 ½”x2 ½” poplar blocks behind the. Your lid will be able to be pulled up and down. Clamp a set of slats against it,.

Glue And Nail The Boards To The Inside Of The Box And Do The Same With The Slightly Thicker Large Board That Will Make Up The Floor Of Your Outdoor Storage Box.

Since you probably don't have a random cedar plank lid laying around, you'll need to edge join three pieces together with exterior wood glue and pocket hole screws. You now have a perfect wooden storage box. Made from 1/2 plywood, these boxes are very rugged, handy and easy to make.

Make 2 Segments / Arcs On The Sides Of The Box For Lifting.

At this point, you have used 5 pieces of the plywood, and your last piece will be the lid. Diy weathered summer pallet sign. And the result looks really nice.

Step 7 Attach The Lid.

Attach the hinges to the lid and box, 1 3/4 from each edge ; Use the miter saw to cut the ends at 45 degree angles. Mark the ½ inch recess line on the divider.

Leave a Reply

Your email address will not be published.