close
close
Menu Close

Cat 2 Quick Hitch Dimensions

th 161

Cat 2 Quick Hitch Dimensions. Inside to inside 32.68 inch widt A cat 1 quick hitch works with tractors of medium horsepower, generally between 20 and 50.

Quick hitch
Quick hitch from www.mimwearparts.co.uk

Boss quick hitch dimensions lower hitch point span (d) cat 1 695.96mm 702.06mm cat 2 32.62 in. 2 quick hitch and it is approx. 828.55mm 834.14mm cat 3n 32.62 in.

I Believe The Top Link Is Located 24 Above The Center Line Between The Two Lower Lift Pins, But Don't Quote Me On That One.

2 quick hitch and it is approx. Boss quick hitch dimensions lower hitch point span (d) cat 1 695.96mm 702.06mm cat 2 32.62 in. The following dimensions are industry wide specifications.

Bottom To Top Hook Height:

Measured my harbor freight cat. Feel free to contact us or stop by one of our stores if you're interested in trying out the imatch quick hitch or have questions about the different hitch categories. If the pins an be mounted inside or outside, it's usually an attempt to make an implement both cat 1 and cat 2 compatible.

The Heavy Duty Steel Construction And High Strength Tubing For Greater Torsional Strength, Make This Tractor Hitch A Great Addition To Your Tractor Equipment.

A cat 1 quick hitch works with tractors of medium horsepower, generally between 20 and 50. Ships free to a commercial address or address with a method of unloading a crate from the back gate of. Fits most category 2 tractors and implements.

A Cat Ii Hitch Is 32 Inches Wide.

828.55mm 834.14mm cat 3n 32.62 in. Quick hitch since most of the bigger implements are jd and are set up for cat.2 or cat. If hooking up a bushing style quick hitch to a clevis type hitch attachment, the large ends must be cut off of the bushings,for proper spacing and fit.

Inside To Inside 32.68 Inch Widt

If you have a tractor with less than 20 horsepower, you need a cat 0 quick hitch, and if it operates at 50 to 90 horsepower, a cat 2 is your best bet. There are quick hitches available that allow conversion of a cat. The 3n being the same width as a category 2 will also accept those implements when bushings are applied to the pins.

Leave a Reply

Your email address will not be published.